5 Finger ^® Utility Clip 

5 Finger Utility Clip

Download the Instruction Booklet  Adobe PDF (898kb)

Attach clip to belt at waistband by opening the narrow flat tab on the back of the clip and push down over belt. Electrical cords can be inserted into the body of the clip for use in 3 ways.

Controlled flow

Cord will remain taut in the utility clip with minimal sliding. Insert electrical cord over the back tab and under the front tab.

Semi Free Flow

Allows electrical cord to move through the clip with minimal resistance. Insert electrical cord under the back tab and over the front tab.

Free Flow

Allows cord to move freely through the clip. Insert electrical cord over both back and front tabs,

Organize electrical or computer cables

1. Clean surface area with alcohol.

2. Cut industrial strength Velcro to the size of the waistband tab on back of utility clip.

3. Attach the cut piece of industrial strength Velcro to the waistband tab on the back of the utility clip.

4. Attach a strip of industrial strength Velcro to the surface area chosen to mount the utility clip.

5. Allow Velcro to set for 12 hours before using.

6. Insert cables through the utility clip and snap shut.